PTFE输送带采用优质高度进口玻璃纤维及凯芙拉（芳纶）为基材纺织成高强度的网状基布，再涂覆优良高质的特氟龙树脂，制成特氟龙（PTFE）网格输送带的基布，加工而成，特氟龙网格输送带应用范围：纺织印染，印花烘干导带，丝网印刷，紫外线烘干，UV系列光固机，胶印机，松式烘干机，无纺布烘燥机，高周波烘干机，食品烘培机导带，温控烘房，熔剂型油墨的快速干燥和一般含水份物品烘干。

特氟龙PTFE烘干输送带的主要特点：

1.尺寸稳定，强度高，延伸系数小于5‰.

2.而温性好，连续工作-70℃-260℃。

3.表面磨擦系数为0.05-0.1，介电常数小。

4.抗老化，不燃烧，抗粘性优异，易于清洗附着其表面的各种油渍，污点或其它附着物。

5.耐各种强酸，碱，盐和有机溶剂等化学药品的腐蚀。

特氟龙输送带的应用范围：

1：丝网、印刷：松式烘干机、胶印机、UV系列光固机、纸张过油烘干、紫外线烘干、塑胶制品丝印烘干等烘道、烘房输送带。

2：纺织、印染：印花烘干、漂染布烘干、面料缩水烘干、无纺布烘干等烘道、烘房输送带。

3：其它物品：高周波烘干、微波烘干、烘烤、包装物品热收缩、一般含水份物品烘干、熔剂型油墨的快速干燥等烘房导带

Food production

The production of certain foods benefits from the non-stick properties than PTFE (Teflon) offers. A key area is the high volume cooking of meats such as chicken and bacon. We refer to this as contact cooking or grilling. The conveyor belting is typically 650mm or 1050mm wide and works in pairs as a top and bottom belt. The two conveyor belts are very close together and trap the product between then as they move along. Heat is provided by employing oil heated hot plates that allow the meat to cook as it conveys. The PTFE coating prevents food from sticking to the belting, as well as being able to handle high temperatures involved. The principle is very similar to the use of Teflon on non-stick pans.

PTFE coated fabrics can also be used as belting when producing flatbreads. An example of this is the production of flour Tortillas. A single conveyor belt carried small balls of dough along a conveyor while a fixed hot plate squashes the mixture in a round flat tortilla.

Textiles

PTFE coated belting is extensively used when processing textiles. Similar to contact grilling, the belts while in pairs, which are top and bottom. They are used to thermally bond two layers of textiles together, which usually involved heating a glue or adhesive while applying pressure.

Open Mesh PTFE Belting

Open area PTFE belting is very similar to close weaver versions; however, there different reasons and applications for using this.

The main application for mesh is the use of a carrier belt within a hot air oven. Hot air ovens can work for both textiles and food; however, other specialist applications such as can drying also benefit.

Mesh belting is usually supplied with an opening size of 4mm square; however and smaller opening s are also available from our stocks.

Below you will see a few examples of where open mesh belting is working.

Food Production

The open mesh works on many types of conveyors that process food. An example of this is the drying of cereals. Cereals are conveyed at just the right speed and temperature to ensure they dry to the exact level.

Beverage can production

Aluminum beverage cans have a special lacquer on the inside of them to provide a food-safe barrier. orThis is sprayed on to the inside of the can then required to cure via heat. Beverage cans convey on the PTFE mesh belt, which transports them through a hot air oven. The mesh allows air to easily circulate the beverage cans as well as the conveyor belt for maximum efficiency.